Expansion joints & louvres · Glossary

Build-up height

The thickness of screed and finish above the structural slab that a joint profile or trim sits in. Floor joint covers come in set heights, so the build-up decides which height to order.

Related terms in Expansion joints & louvres

Thermal movement
Expansion and contraction caused by temperature change, estimated as Δ = α × L × ΔT. Concrete expands about 8 to 12 millionths of its length per °C, so 30 m of exposed slab with a 55 °C swing moves about 18 mm.
Watertight expansion joint
A joint cover with a sealed centre insert and connection sheets bonded into the waterproofing, so water cannot pass through the joint. Used on car park decks, podiums, kitchens and pools.
Total movement
How far the joint opens and closes in total, written as a figure (20 mm), as plus or minus (±10 mm) or as a percentage of the joint width. A cover must take at least this movement.
Connection sheet
The flexible flanges on each side of a watertight joint that are bonded into the waterproofing: long sheets for bitumen, short sheets for coatings, fleece-laminated sheets for liquid membranes.
Joint width
The gap between the two parts of the structure at the joint, set by the structural engineer. MIGUA tables give it as bf max: the widest gap a cover takes.
Replaceable centre seal
The elastic insert in the middle of a joint cover that takes the movement and keeps water out, and can be changed without breaking out the floor.
Sand trap louvre
A louvre with deep, closely spaced blades that catches airborne sand and dust, used on plant rooms in desert climates.
Contraction joint
A narrow joint cut or formed in a slab to control shrinkage cracking. All-metal covers protect its edges from forklift and hard-wheel traffic.

All expansion joints & louvres terms → · Full glossary →