Nord Floors · MIGUA

Tile trims and profiles: MIGUTEC

MIGUTEC trims finish every tile and stone edge: floor edges, transitions, wall corners, stair nosings, skirtings, decorative inlays and tile movement joints, in aluminium, PVC and stainless steel 304, 316 and 316L.

Why it works

  • Heights from 5 to 50 mm to match tile plus adhesive bed, up to 100 mm for landscape edging
  • Stainless steel in 304, 316 and 316L, brushed or mirror, with bronze, champagne gold and rose gold finishes
  • Aluminium anodised or powder coated in eight finishes; PVC in 13 colours
  • Matching corner pieces, end caps and joints for the square stainless range
  • Tile movement joints with replaceable rubber inserts in several colours

Specification

MaterialsExtruded aluminium, PVC, stainless steel 304 / 316 / 316L
Standard length2.7 m (3 m and 2.44 m for some series)
Heights5–50 mm; skirtings 60 / 80 / 100 mm; landscape 65 / 80 / 100 mm
Stair nosingsAluminium 6063-T6 with carborundum or rubber inserts; stainless steel
MasterFormat09 30 00 Tiling: trims and profiles
UseSeriesMaterialsHeights
Floor edgesMTLFA-3, MTLFS-3, MTLUFS-3, MTLUFS-E-3, MTSFSAluminium, stainless7–40 mm
Transitions (same level)MTTFA, MTTFS-6, MTTFS-8, MTIFS-3Aluminium, stainless5–15 mm
Level changesMTZFS, MTLUFS-I-3Stainless8–40 mm
Decorative inlaysMTUFS-5, MTCFFS-5 / 10 / 20, MTUFFS-10Stainless8–20 mm
Wall cornersMTRWA, MTSWA, MTVWA, MTYWA, MTBWA, MTRWP, MTSWP, MTRWS, MTSWS, MTQWS, MTBWS, MTPWS-12Aluminium, PVC, stainless8–14 mm (50 mm box)
Wall tile edgesMTLWA-3, MTLWP, MTLUWS-3, MTZWSAluminium, PVC, stainless8–15 mm
Wall groovesMTFWA, MTTTWA, MTUWAAluminium8–20 mm
Stair nosingsMSNA-45, MSNCA-52 / 75 / 82, MSNRA-52 / 75, MSNS-30Aluminium with inserts, stainless20–30 mm
SkirtingMSKSA, MSKSSAluminium, stainless60 / 80 / 100 mm
Tile movement jointsMTMFFA-12, MTMIFA-10, MTMLFA-10, MTMTFA-10, MTMTFP-10, MTMIFS-10, MTMLFS-10, MTMTFS-10Aluminium with rubber, PVC, stainless8–50 mm
Landscape edgingMTLGFAAluminium65 / 80 / 100 mm

From the MIGUA MIGUTEC Trims and Profiles catalogue. Colour samples are sent for approval; actual finish may vary from the illustration.

Applications

Malls and hotelsOffices and lobbiesHospitals and kitchensPools and wet areasStairs and terracesLandscape and paving

Documents

MIGUTEC Trims and Profiles catalogue Colour samples Installation instructions

Sent with your quotation or submittal. Data sheets and brochures are also in Downloads.

Questions

What size tile trim do I need?

Tile thickness plus adhesive bed, then the trim at that height or the next size up: a 10 mm tile on a 3 mm bed takes a 12.5 mm trim.

Which grade of stainless steel?

304 for dry and wet interiors. 316 or 316L for pools, coastal sites and areas cleaned with chemicals: the molybdenum in 316 resists chlorides.

Where do tile movement joints go?

At every perimeter, change of plane and structural joint, and in the field every 6.1 to 7.6 m indoors or every 2.4 to 3.7 m outdoors or in sun or moisture (TCNA EJ171).

Product data: MIGUA. MIGUA is an authorised partner of Nordinfini.