Find the right expansion joint
Tell us where the joint is, what crosses it, how wide it is and how much it moves. We match about 70 MIGUA profiles, add fire barriers and seals, and write the specification.
1Where is the joint?
2What crosses it?
Pick the heaviest thing that will roll over the joint.
3Size it
Take both numbers from the structural engineer's joint schedule.
4Finish and conditions
5Add-ons
What goes under and around the cover. The preview shows each layer.
Fire barrier data from the MIGUMAX catalogue. Vapour barriers and corner pieces are detailed per project.
6Matching MIGUA profiles
FP 55 4S Best fit
Made for tiles floors
FP 85
Made for tiles floors
FS 100
Made for tiles floors
FSX 75
Made for tiles floors
FSL 77
Made for tiles floors
SFS 90
Made for tiles floors
Data from MIGUA catalogues (MIGUTEC, MIGUTRANS, MIGUTAN, MIGUMAX). Loads are shown as printed in the catalogue; we confirm the load class and anchoring with MIGUA for your project before submittal.
Questions
How do I choose an expansion joint cover?
Start with where the joint is (floor, deck, wall or roof) and what crosses it. Then take the joint width and the total movement from the structural engineer’s joint schedule, and pick the finish on each side. The selector matches about 70 MIGUA profiles to those four answers.
Do expansion joints need a fire barrier?
Where the joint crosses a fire compartment floor or wall, yes. MIGUA blanket-type fire barriers are tested to UL 2079 for a 2-hour rating with 50% movement, for joint gaps of 25 to 500 mm, and fit under most MIGUA covers including the seismic range.
Which joints are watertight?
The MIGUTAN range for decks and car parks, and the watertight MIGUTRANS STW profiles. They connect to bituminous layers, coatings and liquid membranes with a replaceable sealing insert.
Is the cross-section a shop drawing?
No. The animation is indicative and shows how the joint works. Our technical team sends the actual profile drawings, anchoring details, corners and transitions with MIGUA for your project.