We manufacture in Dammam: raised access floor panels and pedestals in our own factory in Dammam Industrial Area 2, and pre-insulated HVAC ducts on our own CNC line. We also produce our own carpets. The people who answer your technical questions are the people who made the product.
Making panels ourselves lets us hold tolerances that installers notice: for nSteelCement, squareness within 0.75 mm and flatness within 1.0 mm on the diagonal. It also means short lead times for Saudi projects and a factory you can visit before you specify.
Four series: nSteelCement, nGroove, nHPL and nSDV
Six load grades from 3.7 to 11.1 kN
Pedestals, stringers and accessories to match
ISO 9001, ISO 14001 and ISO 45001 certified
From coil to site
How a panel is made
01
Steel in
Coil steel is received, checked against the mill certificate and stored dry. Nothing goes onto the line without a traceable batch.
02
Forming and filling
Top and bottom steel sheets are formed and welded into a shell, then filled with a cementitious core and cured. nGroove panels are made from high-density calcium sulphate.
03
Checked and load tested
Panels are checked for squareness and flatness, and production samples are load tested to the CISCA test procedures for concentrated, ultimate, uniform and rolling loads.
04
Packed and dispatched
Panels are labelled by series and grade, stacked on pallets and delivered with the pedestals and accessories for each zone of the project.
We fabricate pre-insulated ductwork in-house in Dammam from Kingspan pre-insulated panels, cut on our own CNC line. Cutting and assembling the ducts ourselves means each duct is made to the project's drawings, and the team that sizes the ductwork is the team that builds it.
Factory fans and cooling run on solar power, cement mix washed off in production goes back into new mixes, our panel mix uses recycled fly ash, and grey water is treated and reused on site.