Nord Floors · Premium calcium sulphate raised access floor for hard finishes bonded directly

nGroove Series

nGroove is our premium raised access floor: a white/beige high-density calcium sulphate panel with grooved edges that interlock panel to panel, on four pedestals, made in Dammam. It is the best panel for marble, natural stone, porcelain or parquet bonded straight on, with no board layer, and carries 4.5 to 11.1 kN. For most hard-finish projects, nSteelCement with a plywood, cement board or fibreboard layer does the job at a lower cost.

600 × 600 mm40 mmFFH 80–2000 mmA1 + 120-min integrityIIC 55

Overview

The groove edge locks every panel to its neighbours, giving one continuous, stable surface. Stone and porcelain stay flat and crack-free because the panels cannot shift or flex beneath them.

Features

  • Interlocking groove edge stops panels shifting or bending under a rigid finish.
  • Any finish, bonded directly: marble, stone, porcelain, vinyl, parquet.
  • 120-minute fire integrity to EN 1366-6, plus A1 non-combustible.
  • High-density calcium sulphate core for long-term dimensional stability.
nGroove panel on four pedestals with round heads

Illustration. Round head pedestals.

Marble-finished raised access floor in a lobby, one panel lifted to show the pedestals

Under a marble lobby. Stone bonded straight to nGroove panels, with one panel lifted to reach the services below. Illustration.

Specification

Panel size600 × 600 mm
Thickness40 mm
Weightapprox. 18–24 kg
CoreHigh-density calcium sulphate, white/beige
Finished floor height80–2000 mm
Squareness0.5 mm max
Flatness0.6 mm max
Twist0.5 mm max
FireNon-combustible (BS 476-4), A1 (EN 13501-1), Class A (ASTM E84), 120-min integrity (EN 1366-6)
AcousticIIC 55, bare panel (ASTM E492-09)
PedestalRound head, galvanised steel, four per panel

Finishes

Marble, natural stone, porcelain, vinyl and parquet bonded directly to the panel, with no board layer.

Understructure

Stringerless up to 600 mm FFH, with chemical anchoring. Above 600 mm: stringers and mechanical anchoring.

Applications

Lobbies and receptionsRetailRestaurantsAuditoriumsPremium offices

nGroove load grades

GradeConcentratedImpactUltimateUniformRolling, 10 passesRolling, 10,000 passes
GV370 (not made)3.7 kN0.6710.8 kN19.8 kN/م²3.0 kN2.2 kN
GV4504.5 kN0.6713.5 kN23.3 kN/م²3.6 kN3.0 kN
GV5605.6 kN0.6716.8 kN33.1 kN/م²4.5 kN3.6 kN
GV6806.8 kN0.6720.1 kN42.6 kN/م²5.6 kN4.5 kN
GV8908.9 kN0.6726.7 kN49.9 kN/م²6.7 kN5.6 kN
GV111011.1 kN0.6733.3 kN58.3 kN/م²8.9 kN6.7 kN

Recommended minimum for offices: the 450 grade (4.5 kN). For MEWP access: 680 (6.8 kN) and above. Tested to CISCA Recommended Test Procedures for Access Floors.

Documents

The nGroove data sheet is in Downloads. Ask for the rest with your quotation or submittal pack.

nGroove · Technical data sheet nGroove · Fire integrity report (EN 1366-6) nGroove · Load test report nGroove · Installation guide nGroove · Stone-finish guide nGroove · CAD / BIM

Questions about nGroove

Why does Nord Floors recommend 4.5 kN as a minimum?

Lighter grades can carry ordinary office loads, but a 4.5 kN panel is stiffer. It sounds more solid underfoot, transmits less footfall noise and holds up better over the life of the building. We recommend 4.5 kN as the minimum for every office.

Can I put marble or stone on a raised floor?

Yes. nSteelCement is our standard panel and takes marble, stone, porcelain and parquet: fix a plywood, cement board or fibreboard layer to the panels, then lay the finish on it. Carpet tiles, LVT and SPC go straight onto the panel. nGroove is our premium panel for projects that need the hard finish bonded straight to the panel with no board layer.

Can a MEWP or scissor lift be used on a raised access floor?

Yes, on 6.8 kN grades and above. Nord Floors floors at 6.8 kN carry MEWPs on site today. Forklifts and pallet stackers are possible on heavy grades after Nord Floors engineering checks the wheel loads.

When does a raised floor need stringers and mechanical anchoring?

nHPL and nSDV are gravity-laid systems, so they use stringers at every height, from the lowest. nSteelCement and nGroove are corner-locking systems, fixed to the pedestal heads at each corner, so they need stringers only above 600 mm finished floor height. Up to 600 mm, chemical (adhesive) anchoring of the pedestals is enough; above 600 mm, pedestals are mechanically anchored to the slab.

Which standard are Nord Floors raised floors tested to?

Nord Floors follows the CISCA (Ceilings & Interior Systems Construction Association) Recommended Test Procedures for Access Floors for concentrated, ultimate, uniform and rolling loads.

Is woodcore (chipboard) raised flooring suitable for Saudi Arabia?

Usually not the best choice. Woodcore panels have a compressed wood-chip (chipboard) core, made for dry indoor conditions. Coastal humidity in Jeddah and Dammam, water from cleaning or leaks, and wet works during construction can make the core swell and lose strength. Woodcore is combustible (typically Bfl to Dfl fire classes), and many woodcore systems are rated only at light to medium grades. Steel cementitious panels such as nSteelCement are non-combustible (A1), do not swell with moisture, carry 3.7 to 11.1 kN, and last the life of the building; the steel shell is fully recyclable at end of life.

When do I need nHPL or nSDV?

Only where the room needs antistatic (nHPL) or static dissipative (nSDV) flooring, such as data rooms, server rooms and control rooms. Both come with their final finish factory-applied.