Nord WPI · Kingspan
Roof insulation: Kingspan Thermaroof TR27
Thermaroof TR27 is a rigid PIR roof board with thermal conductivity of 0.022 W/mK, for flat roofs under almost every waterproofing system. It is FM Approved to FM 4470 and suits Saudi roofs that need high insulation in a light, thin build-up.
Why it works
- Fibre-free rigid thermoset PIR core, 0.022 W/mK at 23 °C mean temperature
- Coated glass tissue facings on both sides, bonded during manufacture
- Compressive stress above 100 kPa up to 120 mm thick, above 90 kPa for 120–150 mm (at 10% compression)
- Works with fully adhered and mechanically fixed single-ply, built-up felt, mastic asphalt, cold liquid applied waterproofing and most green roofs
- FM Approved (FM 4470); approved by Dubai Central Laboratory
- Blowing agent with zero ozone depletion potential and GWP of 5 or less
Specification
| Core | PIR |
|---|---|
| Facings | Coated glass tissue both sides |
| Thermal conductivity | 0.022 W/mK |
| Density | 32 kg/m³ |
| Board size | 2400 × 1200 mm |
Documents
Technical data sheet U-value calculations by deck type FM approval
Sent with your quotation or submittal. Data sheets and brochures are also in Downloads.
Questions
Can TR27 go under a TPO membrane?
Yes. Thermaroof TR27 works under fully adhered and mechanically fixed single-ply membranes, including Kingspan TPO, so the whole roof build-up comes from one source.
Product data: Kingspan. Kingspan is an authorised partner of Nordinfini.