Tile trim selector · MIGUA MIGUTEC

Find the right tile trim

Pick where the trim goes, your tile and bed thickness, the environment and the look. We match more than 50 MIGUTEC trim series in aluminium, PVC and stainless steel, give the exact code and height, count the lengths and movement joints, and write the specification.

1Where does the trim go?

2Tile and bed

Thin-bed adhesive usually leaves about 3 mm; large tiles and stone more. The trim height must cover tile plus bed.

Tile or stone thickness
10 mm
Adhesive bed under the tile
3 mm
Trim height needed: 13 mm

3Where and how it is cleaned

Look

4Quantity

Total run of trim
20 m

5Matching MIGUTEC trims

MIGUTEC · Floor edge trim · Aluminium

MTLFA-3-12.5 Best fit

78%fit
Height 12.5 mmVisible width 3 mmMaterial: Extruded aluminium, anodised or powder coated8 × 2.7 m lengths

Aluminium L edge for floor tiles · Height matches tile plus bed · Most economical for dry interiors

Finishes: Matt Silver, Matt Gold, Matt Black, Polished Silver, Polish Bronze, Champagne Brush, Polish Gold, Bronze Matt

MIGUTEC · Floor edge trim · Stainless steel

MTLFS-3-12.5

70%fit
Height 12.5 mmVisible width 3 mmMaterial: SS 3048 × 2.7 m lengths

Stainless L edge, up to 40 mm for stone · Height matches tile plus bed · Grade 304 suits dry and wet interiors

Finishes: Brushed, Mirror, Bronze, Champagne Gold, Rose Gold

MIGUTEC · Floor edge trim · Stainless steel

MTLUFS-3-15

70%fit
Height 15 mmVisible width 3 mmMaterial: SS 3048 × 2.7 m lengths

Stainless L with 90° bend, covers the exposed tile edge · Height matches tile plus bed · Grade 304 suits dry and wet interiors

Finishes: Brushed, Mirror, Bronze, Champagne Gold, Rose Gold

MIGUTEC · Floor edge trim · Stainless steel

MTLUFS-E-3-15

70%fit
Height 15 mmVisible width 3 mmMaterial: SS 3048 × 2.7 m lengths

Stainless L with long 90° bend, for steps and raised edges · Height matches tile plus bed · Grade 304 suits dry and wet interiors

Finishes: Brushed, Mirror, Bronze, Champagne Gold, Rose Gold

MIGUTEC · Floor edge trim · Stainless steel

MTSFS-12.5

70%fit
Height 12.5 mmMaterial: SS 3048 × 2.7 m lengths

Stainless square edge for floors · Height matches tile plus bed · Grade 304 suits dry and wet interiors

Finishes: Brushed, Mirror, Bronze, Champagne Gold, Rose Gold

Data from the MIGUA MIGUTEC Trims and Profiles catalogue: aluminium, PVC and stainless steel 304, 316 and 316L. Lengths include 5% for cutting. Colour samples are sent for approval.

© Nordinfini 2026. The logic and data behind this tool belong to Nordinfini. Use it freely for your projects; copying, republishing or automated collection of its results is not permitted. Terms

Questions

What size tile trim do I need?

Add the tile thickness and the adhesive bed under it, then take the trim at that height or the next size up. A 10 mm tile on a 3 mm bed needs a 12.5 mm trim. If the trim is too low the tile edge stands proud; if it is much higher, thicken the bed.

Aluminium, PVC or stainless steel?

Aluminium is the economical choice for dry interiors and comes anodised or powder coated in eight finishes. PVC does not corrode and comes in 13 colours to match the tile. Stainless steel 304 suits dry and wet interiors; specify 316 or 316L for pools, coastal sites and areas cleaned with chemicals, because its molybdenum resists chlorides.

How many tile movement joints do I need?

The TCNA EJ171 guideline puts field movement joints every 6.1 to 7.6 m each way indoors, and every 2.4 to 3.7 m outdoors or where tiles get direct sun or moisture, plus at every perimeter, change of plane and structural joint. The selector counts the joints and the metres of profile for your area.

All about MIGUTEC tile trims →