Expansion joints & louvres · Glossary
Thermal movement
Expansion and contraction caused by temperature change, estimated as Δ = α × L × ΔT. Concrete expands about 8 to 12 millionths of its length per °C, so 30 m of exposed slab with a 55 °C swing moves about 18 mm.
Related terms in Expansion joints & louvres
- Total movement
- How far the joint opens and closes in total, written as a figure (20 mm), as plus or minus (±10 mm) or as a percentage of the joint width. A cover must take at least this movement.
- Build-up height
- The thickness of screed and finish above the structural slab that a joint profile or trim sits in. Floor joint covers come in set heights, so the build-up decides which height to order.
- Joint width
- The gap between the two parts of the structure at the joint, set by the structural engineer. MIGUA tables give it as bf max: the widest gap a cover takes.
- Watertight expansion joint
- A joint cover with a sealed centre insert and connection sheets bonded into the waterproofing, so water cannot pass through the joint. Used on car park decks, podiums, kitchens and pools.
- Sand trap louvre
- A louvre with deep, closely spaced blades that catches airborne sand and dust, used on plant rooms in desert climates.
- Connection sheet
- The flexible flanges on each side of a watertight joint that are bonded into the waterproofing: long sheets for bitumen, short sheets for coatings, fleece-laminated sheets for liquid membranes.
- Rain defence class
- A classification (EN 13030) of how well a louvre keeps out driven rain, from class A (best) to D.
- Replaceable centre seal
- The elastic insert in the middle of a joint cover that takes the movement and keeps water out, and can be changed without breaking out the floor.