Expansion joints & louvres · Glossary

Total movement

How far the joint opens and closes in total, written as a figure (20 mm), as plus or minus (±10 mm) or as a percentage of the joint width. A cover must take at least this movement.

Related terms in Expansion joints & louvres

Joint width
The gap between the two parts of the structure at the joint, set by the structural engineer. MIGUA tables give it as bf max: the widest gap a cover takes.
Thermal movement
Expansion and contraction caused by temperature change, estimated as Δ = α × L × ΔT. Concrete expands about 8 to 12 millionths of its length per °C, so 30 m of exposed slab with a 55 °C swing moves about 18 mm.
Sand trap louvre
A louvre with deep, closely spaced blades that catches airborne sand and dust, used on plant rooms in desert climates.
Build-up height
The thickness of screed and finish above the structural slab that a joint profile or trim sits in. Floor joint covers come in set heights, so the build-up decides which height to order.
Rain defence class
A classification (EN 13030) of how well a louvre keeps out driven rain, from class A (best) to D.
Watertight expansion joint
A joint cover with a sealed centre insert and connection sheets bonded into the waterproofing, so water cannot pass through the joint. Used on car park decks, podiums, kitchens and pools.
Free area
The open area of a louvre through which air can pass, as a percentage of the face area.
Connection sheet
The flexible flanges on each side of a watertight joint that are bonded into the waterproofing: long sheets for bitumen, short sheets for coatings, fleece-laminated sheets for liquid membranes.

All expansion joints & louvres terms → · Full glossary →