Expansion joints & louvres · Glossary

Joint width

The gap between the two parts of the structure at the joint, set by the structural engineer. MIGUA tables give it as bf max: the widest gap a cover takes.

Related terms in Expansion joints & louvres

Sand trap louvre
A louvre with deep, closely spaced blades that catches airborne sand and dust, used on plant rooms in desert climates.
Total movement
How far the joint opens and closes in total, written as a figure (20 mm), as plus or minus (±10 mm) or as a percentage of the joint width. A cover must take at least this movement.
Rain defence class
A classification (EN 13030) of how well a louvre keeps out driven rain, from class A (best) to D.
Thermal movement
Expansion and contraction caused by temperature change, estimated as Δ = α × L × ΔT. Concrete expands about 8 to 12 millionths of its length per °C, so 30 m of exposed slab with a 55 °C swing moves about 18 mm.
Free area
The open area of a louvre through which air can pass, as a percentage of the face area.
Build-up height
The thickness of screed and finish above the structural slab that a joint profile or trim sits in. Floor joint covers come in set heights, so the build-up decides which height to order.
Performance louvre
A façade louvre tested for airflow and rain resistance, for plant rooms and ventilated façades.
Watertight expansion joint
A joint cover with a sealed centre insert and connection sheets bonded into the waterproofing, so water cannot pass through the joint. Used on car park decks, podiums, kitchens and pools.

All expansion joints & louvres terms → · Full glossary →