Raised floors · Glossary
Ultimate load
The load at which a panel fails in test. Rated loads are set well below it so the floor keeps a wide safety margin.
Related terms in Raised floors
- Concentrated load
- The load a panel carries on a small area (a 25 × 25 mm indenter in the CISCA test), like a chair leg or cabinet foot, without exceeding the allowed deflection. Nord Floors grades run from 3.7 to 11.1 kN.
- Rolling load
- The load a panel withstands from a wheel rolling across it (pallet trucks, server racks on castors, MEWPs) for a set number of passes, typically 10 and 10,000.
- Edge trim
- A plastic or metal edge band around a panel that protects the edge, keeps finishes neat and helps panels sit tight in the grid.
- Impact load
- The load a panel survives when a weight is dropped onto it, simulating dropped tools and equipment during fit-out.
- Interlocking groove edge
- Panel edges machined with a tongue-and-groove profile so neighbouring panels lock together. It stops panels shifting under rigid finishes such as stone and porcelain.
- Uniformly distributed load (UDL)
- The load spread evenly over the whole floor area, in kN/m², such as storage, dense furniture or battery rooms.
- Woodcore panel
- A panel with a particleboard core, usually wrapped in steel or aluminium foil. Lighter and cheaper but more sensitive to humidity and water than steel cementitious or calcium sulphate panels.
- Deflection
- How far a panel bends under load. Load ratings are tied to a maximum permitted deflection, not only to failure.