Raised floors · Glossary

Uniformly distributed load (UDL)

The load spread evenly over the whole floor area, in kN/m², such as storage, dense furniture or battery rooms.

Related terms in Raised floors

Impact load
The load a panel survives when a weight is dropped onto it, simulating dropped tools and equipment during fit-out.
Deflection
How far a panel bends under load. Load ratings are tied to a maximum permitted deflection, not only to failure.
Rolling load
The load a panel withstands from a wheel rolling across it (pallet trucks, server racks on castors, MEWPs) for a set number of passes, typically 10 and 10,000.
Load grade
The named rating of a panel (for example 4.5 kN) that tells the specifier which concentrated, uniform and rolling loads it carries.
Ultimate load
The load at which a panel fails in test. Rated loads are set well below it so the floor keeps a wide safety margin.
Chemical anchoring
Fixing pedestal bases to the slab with a structural adhesive. Suited to lower floor heights.
Concentrated load
The load a panel carries on a small area (a 25 × 25 mm indenter in the CISCA test), like a chair leg or cabinet foot, without exceeding the allowed deflection. Nord Floors grades run from 3.7 to 11.1 kN.
Mechanical anchoring
Fixing pedestal bases to the slab with bolts or anchors. Used for taller floors and where lateral loads are higher.

All raised floors terms → · Full glossary →