Raised floors · Glossary

Concentrated load

Also called: Point load

The load a panel carries on a small area (a 25 × 25 mm indenter in the CISCA test), like a chair leg or cabinet foot, without exceeding the allowed deflection. Nord Floors grades run from 3.7 to 11.1 kN.

Related terms in Raised floors

Edge trim
A plastic or metal edge band around a panel that protects the edge, keeps finishes neat and helps panels sit tight in the grid.
Ultimate load
The load at which a panel fails in test. Rated loads are set well below it so the floor keeps a wide safety margin.
Interlocking groove edge
Panel edges machined with a tongue-and-groove profile so neighbouring panels lock together. It stops panels shifting under rigid finishes such as stone and porcelain.
Rolling load
The load a panel withstands from a wheel rolling across it (pallet trucks, server racks on castors, MEWPs) for a set number of passes, typically 10 and 10,000.
Woodcore panel
A panel with a particleboard core, usually wrapped in steel or aluminium foil. Lighter and cheaper but more sensitive to humidity and water than steel cementitious or calcium sulphate panels.
Impact load
The load a panel survives when a weight is dropped onto it, simulating dropped tools and equipment during fit-out.
Calcium sulphate panel
A dense, solid panel made from high-density calcium sulphate (often fibre-reinforced). Quiet underfoot and very stiff; nGroove uses it with grooved, interlocking edges for stone and porcelain bonded directly.
Uniformly distributed load (UDL)
The load spread evenly over the whole floor area, in kN/m², such as storage, dense furniture or battery rooms.

All raised floors terms → · Full glossary →