Raised floors · Glossary
Calcium sulphate panel
A dense, solid panel made from high-density calcium sulphate (often fibre-reinforced). Quiet underfoot and very stiff; nGroove uses it with grooved, interlocking edges for stone and porcelain bonded directly.
Related terms in Raised floors
- Steel cementitious panel
- A panel made of a welded steel shell filled with a lightweight cementitious core. Strong, non-combustible and the basis of nSteelCement, nHPL and nSDV.
- Woodcore panel
- A panel with a particleboard core, usually wrapped in steel or aluminium foil. Lighter and cheaper but more sensitive to humidity and water than steel cementitious or calcium sulphate panels.
- Floor void
- The space between the slab and the underside of the panels, used for cabling, pipework and, in data centres, as an air plenum.
- Interlocking groove edge
- Panel edges machined with a tongue-and-groove profile so neighbouring panels lock together. It stops panels shifting under rigid finishes such as stone and porcelain.
- Finished floor height (FFH)
- The distance from the top of the structural slab to the top of the finished floor surface, including the panel and its finish.
- Edge trim
- A plastic or metal edge band around a panel that protects the edge, keeps finishes neat and helps panels sit tight in the grid.
- Stringerless system
- A raised floor where panels sit directly on pedestal heads with no stringers. Quicker to install and fully open underneath; suited to lower floor heights and office loads.
- Concentrated load
- The load a panel carries on a small area (a 25 × 25 mm indenter in the CISCA test), like a chair leg or cabinet foot, without exceeding the allowed deflection. Nord Floors grades run from 3.7 to 11.1 kN.