Raised floors · Glossary

Stringerless system

A raised floor where panels sit directly on pedestal heads with no stringers. Quicker to install and fully open underneath; suited to lower floor heights and office loads.

Related terms in Raised floors

Stringer
A horizontal bar that connects pedestal heads. Stringers add lateral stability on higher floors, under heavy rolling loads and in data centres.
Finished floor height (FFH)
The distance from the top of the structural slab to the top of the finished floor surface, including the panel and its finish.
Pedestal head
The top plate of a pedestal that carries the corners of four panels. Heads are often fitted with a conductive or sound-deadening gasket and locate the panels in the grid.
Floor void
The space between the slab and the underside of the panels, used for cabling, pipework and, in data centres, as an air plenum.
Pedestal
The adjustable steel support under the corners of the panels. A threaded stem sets the finished floor height, and the base is fixed to the slab with adhesive or mechanical anchors.
Steel cementitious panel
A panel made of a welded steel shell filled with a lightweight cementitious core. Strong, non-combustible and the basis of nSteelCement, nHPL and nSDV.
Raised access floor
A floor of removable panels on adjustable pedestals, built above the structural slab so cables, data, power and air can run underneath and be reached at any time by lifting a panel.
Calcium sulphate panel
A dense, solid panel made from high-density calcium sulphate (often fibre-reinforced). Quiet underfoot and very stiff; nGroove uses it with grooved, interlocking edges for stone and porcelain bonded directly.

All raised floors terms → · Full glossary →