Raised floors · Glossary

Floor void

Also called: Plenum void

The space between the slab and the underside of the panels, used for cabling, pipework and, in data centres, as an air plenum.

Related terms in Raised floors

Finished floor height (FFH)
The distance from the top of the structural slab to the top of the finished floor surface, including the panel and its finish.
Steel cementitious panel
A panel made of a welded steel shell filled with a lightweight cementitious core. Strong, non-combustible and the basis of nSteelCement, nHPL and nSDV.
Stringerless system
A raised floor where panels sit directly on pedestal heads with no stringers. Quicker to install and fully open underneath; suited to lower floor heights and office loads.
Calcium sulphate panel
A dense, solid panel made from high-density calcium sulphate (often fibre-reinforced). Quiet underfoot and very stiff; nGroove uses it with grooved, interlocking edges for stone and porcelain bonded directly.
Stringer
A horizontal bar that connects pedestal heads. Stringers add lateral stability on higher floors, under heavy rolling loads and in data centres.
Woodcore panel
A panel with a particleboard core, usually wrapped in steel or aluminium foil. Lighter and cheaper but more sensitive to humidity and water than steel cementitious or calcium sulphate panels.
Pedestal head
The top plate of a pedestal that carries the corners of four panels. Heads are often fitted with a conductive or sound-deadening gasket and locate the panels in the grid.
Interlocking groove edge
Panel edges machined with a tongue-and-groove profile so neighbouring panels lock together. It stops panels shifting under rigid finishes such as stone and porcelain.

All raised floors terms → · Full glossary →