Raised floors · Glossary

Edge trim

A plastic or metal edge band around a panel that protects the edge, keeps finishes neat and helps panels sit tight in the grid.

Related terms in Raised floors

Interlocking groove edge
Panel edges machined with a tongue-and-groove profile so neighbouring panels lock together. It stops panels shifting under rigid finishes such as stone and porcelain.
Concentrated load
The load a panel carries on a small area (a 25 × 25 mm indenter in the CISCA test), like a chair leg or cabinet foot, without exceeding the allowed deflection. Nord Floors grades run from 3.7 to 11.1 kN.
Woodcore panel
A panel with a particleboard core, usually wrapped in steel or aluminium foil. Lighter and cheaper but more sensitive to humidity and water than steel cementitious or calcium sulphate panels.
Ultimate load
The load at which a panel fails in test. Rated loads are set well below it so the floor keeps a wide safety margin.
Calcium sulphate panel
A dense, solid panel made from high-density calcium sulphate (often fibre-reinforced). Quiet underfoot and very stiff; nGroove uses it with grooved, interlocking edges for stone and porcelain bonded directly.
Rolling load
The load a panel withstands from a wheel rolling across it (pallet trucks, server racks on castors, MEWPs) for a set number of passes, typically 10 and 10,000.
Steel cementitious panel
A panel made of a welded steel shell filled with a lightweight cementitious core. Strong, non-combustible and the basis of nSteelCement, nHPL and nSDV.
Impact load
The load a panel survives when a weight is dropped onto it, simulating dropped tools and equipment during fit-out.

All raised floors terms → · Full glossary →