Raised floors · Glossary

Rolling load

The load a panel withstands from a wheel rolling across it (pallet trucks, server racks on castors, MEWPs) for a set number of passes, typically 10 and 10,000.

Related terms in Raised floors

Ultimate load
The load at which a panel fails in test. Rated loads are set well below it so the floor keeps a wide safety margin.
Impact load
The load a panel survives when a weight is dropped onto it, simulating dropped tools and equipment during fit-out.
Concentrated load
The load a panel carries on a small area (a 25 × 25 mm indenter in the CISCA test), like a chair leg or cabinet foot, without exceeding the allowed deflection. Nord Floors grades run from 3.7 to 11.1 kN.
Uniformly distributed load (UDL)
The load spread evenly over the whole floor area, in kN/m², such as storage, dense furniture or battery rooms.
Edge trim
A plastic or metal edge band around a panel that protects the edge, keeps finishes neat and helps panels sit tight in the grid.
Deflection
How far a panel bends under load. Load ratings are tied to a maximum permitted deflection, not only to failure.
Interlocking groove edge
Panel edges machined with a tongue-and-groove profile so neighbouring panels lock together. It stops panels shifting under rigid finishes such as stone and porcelain.
Load grade
The named rating of a panel (for example 4.5 kN) that tells the specifier which concentrated, uniform and rolling loads it carries.

All raised floors terms → · Full glossary →