Raised floors · Glossary
Deflection
How far a panel bends under load. Load ratings are tied to a maximum permitted deflection, not only to failure.
Related terms in Raised floors
- Uniformly distributed load (UDL)
- The load spread evenly over the whole floor area, in kN/m², such as storage, dense furniture or battery rooms.
- Load grade
- The named rating of a panel (for example 4.5 kN) that tells the specifier which concentrated, uniform and rolling loads it carries.
- Impact load
- The load a panel survives when a weight is dropped onto it, simulating dropped tools and equipment during fit-out.
- Chemical anchoring
- Fixing pedestal bases to the slab with a structural adhesive. Suited to lower floor heights.
- Rolling load
- The load a panel withstands from a wheel rolling across it (pallet trucks, server racks on castors, MEWPs) for a set number of passes, typically 10 and 10,000.
- Mechanical anchoring
- Fixing pedestal bases to the slab with bolts or anchors. Used for taller floors and where lateral loads are higher.
- Ultimate load
- The load at which a panel fails in test. Rated loads are set well below it so the floor keeps a wide safety margin.
- Panel lifter
- A suction tool used to lift panels out of the grid without damaging edges or finishes. Double-cup lifters are used for heavy and stone-finished panels.