Vinyl & hard floors · Glossary

Trim height

The height of a tile trim, chosen to match the tile thickness plus the adhesive bed, or the next size up.

Related terms in Vinyl & hard floors

Tile trim
A metal or PVC profile bedded under the tile edge to protect and finish it: at floor edges, wall corners, transitions and stairs.
Stair nosing
A profile fixed on the front edge of a step to protect it and give grip and visual contrast; inserts of carborundum or rubber add slip resistance.
Heel-proof
An entrance mat or grille whose gaps are narrow enough, usually about 4 to 5 mm, that heels and walking sticks cannot catch.
Tile movement joint
A flexible joint in a tiled floor or wall that lets the tiles move without cracking or lifting: at perimeters, changes of plane, structural joints and at intervals across the field.
Dirt collecting volume
How much dirt an entrance mat holds below its surface, in litres per m². Taller mats hold more: a 42 mm mat holds about twice a 22 mm one.
Stainless steel 316
Stainless steel with 2 to 3% molybdenum that resists chlorides much better than 304. Specify 316 or 316L for pools, coastal sites and areas cleaned with chemicals.
Mat well
The recess formed in the floor to take an entrance mat so its top sits flush with the floor finish. It is edged with an angle frame or lined with a pan.
Slip resistance (R rating)
A ramp-test classification of floor slip resistance under DIN 51130, from R9 (lowest) to R13 (highest).

All vinyl & hard floors terms → · Full glossary →