Vinyl & hard floors · Glossary

Stair nosing

A profile fixed on the front edge of a step to protect it and give grip and visual contrast; inserts of carborundum or rubber add slip resistance.

Related terms in Vinyl & hard floors

Trim height
The height of a tile trim, chosen to match the tile thickness plus the adhesive bed, or the next size up.
Tile movement joint
A flexible joint in a tiled floor or wall that lets the tiles move without cracking or lifting: at perimeters, changes of plane, structural joints and at intervals across the field.
Tile trim
A metal or PVC profile bedded under the tile edge to protect and finish it: at floor edges, wall corners, transitions and stairs.
Stainless steel 316
Stainless steel with 2 to 3% molybdenum that resists chlorides much better than 304. Specify 316 or 316L for pools, coastal sites and areas cleaned with chemicals.
Heel-proof
An entrance mat or grille whose gaps are narrow enough, usually about 4 to 5 mm, that heels and walking sticks cannot catch.
Slip resistance (R rating)
A ramp-test classification of floor slip resistance under DIN 51130, from R9 (lowest) to R13 (highest).
Dirt collecting volume
How much dirt an entrance mat holds below its surface, in litres per m². Taller mats hold more: a 42 mm mat holds about twice a 22 mm one.
Pendulum test value (PTV)
A measure of slip resistance from a pendulum test (BS 7976 / EN 16165). 36 or more is generally regarded as low slip potential.

All vinyl & hard floors terms → · Full glossary →