Vinyl & hard floors · Glossary

Tile movement joint

A flexible joint in a tiled floor or wall that lets the tiles move without cracking or lifting: at perimeters, changes of plane, structural joints and at intervals across the field.

Related terms in Vinyl & hard floors

Stair nosing
A profile fixed on the front edge of a step to protect it and give grip and visual contrast; inserts of carborundum or rubber add slip resistance.
Stainless steel 316
Stainless steel with 2 to 3% molybdenum that resists chlorides much better than 304. Specify 316 or 316L for pools, coastal sites and areas cleaned with chemicals.
Trim height
The height of a tile trim, chosen to match the tile thickness plus the adhesive bed, or the next size up.
Slip resistance (R rating)
A ramp-test classification of floor slip resistance under DIN 51130, from R9 (lowest) to R13 (highest).
Tile trim
A metal or PVC profile bedded under the tile edge to protect and finish it: at floor edges, wall corners, transitions and stairs.
Pendulum test value (PTV)
A measure of slip resistance from a pendulum test (BS 7976 / EN 16165). 36 or more is generally regarded as low slip potential.
Heel-proof
An entrance mat or grille whose gaps are narrow enough, usually about 4 to 5 mm, that heels and walking sticks cannot catch.
Subfloor moisture
Moisture rising from a concrete slab. It must be within the flooring maker's limits before vinyl or wood is laid, or adhesives can fail.

All vinyl & hard floors terms → · Full glossary →