Vinyl & hard floors · Glossary

Tile trim

A metal or PVC profile bedded under the tile edge to protect and finish it: at floor edges, wall corners, transitions and stairs.

Related terms in Vinyl & hard floors

Heel-proof
An entrance mat or grille whose gaps are narrow enough, usually about 4 to 5 mm, that heels and walking sticks cannot catch.
Trim height
The height of a tile trim, chosen to match the tile thickness plus the adhesive bed, or the next size up.
Dirt collecting volume
How much dirt an entrance mat holds below its surface, in litres per m². Taller mats hold more: a 42 mm mat holds about twice a 22 mm one.
Stair nosing
A profile fixed on the front edge of a step to protect it and give grip and visual contrast; inserts of carborundum or rubber add slip resistance.
Mat well
The recess formed in the floor to take an entrance mat so its top sits flush with the floor finish. It is edged with an angle frame or lined with a pan.
Tile movement joint
A flexible joint in a tiled floor or wall that lets the tiles move without cracking or lifting: at perimeters, changes of plane, structural joints and at intervals across the field.
Rep carpet
A ribbed woven carpet used as the cleaning pad of standard-grade entrance mats: good value for interiors and covered entrances.
Stainless steel 316
Stainless steel with 2 to 3% molybdenum that resists chlorides much better than 304. Specify 316 or 316L for pools, coastal sites and areas cleaned with chemicals.

All vinyl & hard floors terms → · Full glossary →