HVAC ducts · Glossary

ASTM E84

Also called: UL 723

The tunnel test that gives a surface burning rating: a flame spread index and a smoke-developed index. Duct materials in the region are often required to be Class A (flame spread 25 or less, smoke 50 or less for ducts).

Related terms in HVAC ducts

UL 181
The Underwriters Laboratories safety standard for factory-made air ducts and air connectors. A Class 1 listing covers flame spread, smoke and other tests, and is widely asked for in the Middle East.
Static pressure
The pressure inside a duct pushing outward on its walls, in pascals. Duct panels are rated for a maximum operating pressure.
Air leakage class
How airtight a duct system is. EN 16798-3 / EN 1507 classes run from A (leakiest) to D (tightest); SMACNA uses leakage classes in the US. Pre-insulated ducts can reach the tighter classes.
Air velocity
How fast air moves through a duct, in m/s. Higher velocity allows smaller ducts but adds noise and pressure loss.
Duct board
Rigid insulation boards (fibreglass or foam) that are cut and folded into ducts. Phenolic and PIR panels are the modern foam-based form.
Equal friction method
A duct sizing method that keeps the pressure loss per metre the same throughout the system.
Duct lagging
Insulation wrapped around the outside of metal ductwork after installation, such as mineral wool or elastomeric foam.
Condensation risk
Moisture forming on a cold duct when its surface drops below the dew point of the surrounding air. Insulation thickness is chosen to keep the outer surface above it.

All hvac ducts terms → · Full glossary →