HVAC ducts · Glossary

Equal friction method

A duct sizing method that keeps the pressure loss per metre the same throughout the system.

Related terms in HVAC ducts

Air velocity
How fast air moves through a duct, in m/s. Higher velocity allows smaller ducts but adds noise and pressure loss.
Condensation risk
Moisture forming on a cold duct when its surface drops below the dew point of the surrounding air. Insulation thickness is chosen to keep the outer surface above it.
Static pressure
The pressure inside a duct pushing outward on its walls, in pascals. Duct panels are rated for a maximum operating pressure.
Dew point
The temperature at which air becomes saturated and water starts to condense. Humid coastal air in Jeddah or Dammam has a high dew point.
ASTM E84
The tunnel test that gives a surface burning rating: a flame spread index and a smoke-developed index. Duct materials in the region are often required to be Class A (flame spread 25 or less, smoke 50 or less for ducts).
Grip flange
A profiled aluminium flange used to join pre-insulated duct sections, often with a bayonet cleat.
UL 181
The Underwriters Laboratories safety standard for factory-made air ducts and air connectors. A Class 1 listing covers flame spread, smoke and other tests, and is widely asked for in the Middle East.
Tie rod reinforcement
Rods fixed across large pre-insulated ducts to stop the walls bowing under pressure.

All hvac ducts terms → · Full glossary →