HVAC ducts · Glossary
Static pressure
The pressure inside a duct pushing outward on its walls, in pascals. Duct panels are rated for a maximum operating pressure.
Related terms in HVAC ducts
- ASTM E84
- The tunnel test that gives a surface burning rating: a flame spread index and a smoke-developed index. Duct materials in the region are often required to be Class A (flame spread 25 or less, smoke 50 or less for ducts).
- Air velocity
- How fast air moves through a duct, in m/s. Higher velocity allows smaller ducts but adds noise and pressure loss.
- UL 181
- The Underwriters Laboratories safety standard for factory-made air ducts and air connectors. A Class 1 listing covers flame spread, smoke and other tests, and is widely asked for in the Middle East.
- Equal friction method
- A duct sizing method that keeps the pressure loss per metre the same throughout the system.
- Air leakage class
- How airtight a duct system is. EN 16798-3 / EN 1507 classes run from A (leakiest) to D (tightest); SMACNA uses leakage classes in the US. Pre-insulated ducts can reach the tighter classes.
- Condensation risk
- Moisture forming on a cold duct when its surface drops below the dew point of the surrounding air. Insulation thickness is chosen to keep the outer surface above it.
- Duct board
- Rigid insulation boards (fibreglass or foam) that are cut and folded into ducts. Phenolic and PIR panels are the modern foam-based form.
- Dew point
- The temperature at which air becomes saturated and water starts to condense. Humid coastal air in Jeddah or Dammam has a high dew point.