HVAC ducts · Glossary

Air velocity

How fast air moves through a duct, in m/s. Higher velocity allows smaller ducts but adds noise and pressure loss.

Related terms in HVAC ducts

Static pressure
The pressure inside a duct pushing outward on its walls, in pascals. Duct panels are rated for a maximum operating pressure.
Equal friction method
A duct sizing method that keeps the pressure loss per metre the same throughout the system.
ASTM E84
The tunnel test that gives a surface burning rating: a flame spread index and a smoke-developed index. Duct materials in the region are often required to be Class A (flame spread 25 or less, smoke 50 or less for ducts).
Condensation risk
Moisture forming on a cold duct when its surface drops below the dew point of the surrounding air. Insulation thickness is chosen to keep the outer surface above it.
UL 181
The Underwriters Laboratories safety standard for factory-made air ducts and air connectors. A Class 1 listing covers flame spread, smoke and other tests, and is widely asked for in the Middle East.
Dew point
The temperature at which air becomes saturated and water starts to condense. Humid coastal air in Jeddah or Dammam has a high dew point.
Air leakage class
How airtight a duct system is. EN 16798-3 / EN 1507 classes run from A (leakiest) to D (tightest); SMACNA uses leakage classes in the US. Pre-insulated ducts can reach the tighter classes.
Grip flange
A profiled aluminium flange used to join pre-insulated duct sections, often with a bayonet cleat.

All hvac ducts terms → · Full glossary →