HVAC ducts · Glossary

Condensation risk

Moisture forming on a cold duct when its surface drops below the dew point of the surrounding air. Insulation thickness is chosen to keep the outer surface above it.

Related terms in HVAC ducts

Equal friction method
A duct sizing method that keeps the pressure loss per metre the same throughout the system.
Dew point
The temperature at which air becomes saturated and water starts to condense. Humid coastal air in Jeddah or Dammam has a high dew point.
Air velocity
How fast air moves through a duct, in m/s. Higher velocity allows smaller ducts but adds noise and pressure loss.
Grip flange
A profiled aluminium flange used to join pre-insulated duct sections, often with a bayonet cleat.
Static pressure
The pressure inside a duct pushing outward on its walls, in pascals. Duct panels are rated for a maximum operating pressure.
Tie rod reinforcement
Rods fixed across large pre-insulated ducts to stop the walls bowing under pressure.
ASTM E84
The tunnel test that gives a surface burning rating: a flame spread index and a smoke-developed index. Duct materials in the region are often required to be Class A (flame spread 25 or less, smoke 50 or less for ducts).
Fire damper
A device in a duct that closes automatically to keep fire from spreading through a fire-rated wall or floor.

All hvac ducts terms → · Full glossary →