HVAC ducts · Glossary

Air leakage class

How airtight a duct system is. EN 16798-3 / EN 1507 classes run from A (leakiest) to D (tightest); SMACNA uses leakage classes in the US. Pre-insulated ducts can reach the tighter classes.

Related terms in HVAC ducts

Duct board
Rigid insulation boards (fibreglass or foam) that are cut and folded into ducts. Phenolic and PIR panels are the modern foam-based form.
UL 181
The Underwriters Laboratories safety standard for factory-made air ducts and air connectors. A Class 1 listing covers flame spread, smoke and other tests, and is widely asked for in the Middle East.
Duct lagging
Insulation wrapped around the outside of metal ductwork after installation, such as mineral wool or elastomeric foam.
ASTM E84
The tunnel test that gives a surface burning rating: a flame spread index and a smoke-developed index. Duct materials in the region are often required to be Class A (flame spread 25 or less, smoke 50 or less for ducts).
Galvanised steel ductwork
Traditional ductwork made from galvanised sheet steel, installed first and insulated separately on site with a second fix.
Static pressure
The pressure inside a duct pushing outward on its walls, in pascals. Duct panels are rated for a maximum operating pressure.
Pre-clad duct
Pre-insulated ductwork with a tougher outer cladding for exposed or outdoor runs, such as Kingspan KDuct.
Air velocity
How fast air moves through a duct, in m/s. Higher velocity allows smaller ducts but adds noise and pressure loss.

All hvac ducts terms → · Full glossary →