HVAC ducts · Glossary

PalDuct PIR 20P80

A 20 mm Kingspan PalDuct PIR panel (4000 × 1200 mm). Kingspan's data sheet rates ducts made from it for -25 °C to +80 °C, up to 1000 Pa and 15 m/s.

Related terms in HVAC ducts

Kingspan PalDuct
Kingspan's pre-insulated duct panel range for the Middle East, made in Dubai. It includes PalDuct PIR and PalDuct Phenolic panels, fabricated into ductwork by approved fabricators.
PalDuct PIR 30P200
A 30 mm Kingspan PalDuct PIR panel (4000 × 1200 mm) for higher pressures and air speeds than 20P80, including outdoor runs.
Kingspan KoolDuct
Kingspan's premium pre-insulated ductwork system made from rigid phenolic panels with aluminium facings. Kingspan reports it was the first rigid phenolic pre-insulated duct to be UL 181 listed as a Class 1 Air Duct.
Pre-clad duct
Pre-insulated ductwork with a tougher outer cladding for exposed or outdoor runs, such as Kingspan KDuct.
PIR duct
A pre-insulated duct made from rigid polyisocyanurate (PIR) foam panels. A cost-effective pre-insulated option with low thermal conductivity.
Galvanised steel ductwork
Traditional ductwork made from galvanised sheet steel, installed first and insulated separately on site with a second fix.
Phenolic duct
A pre-insulated duct made from rigid phenolic foam panels. Phenolic has very low thermal conductivity and strong fire performance, so the walls can be thin.
Duct lagging
Insulation wrapped around the outside of metal ductwork after installation, such as mineral wool or elastomeric foam.

All hvac ducts terms → · Full glossary →