HVAC ducts · Glossary
PalDuct PIR 30P200
A 30 mm Kingspan PalDuct PIR panel (4000 × 1200 mm) for higher pressures and air speeds than 20P80, including outdoor runs.
Related terms in HVAC ducts
- PalDuct PIR 20P80
- A 20 mm Kingspan PalDuct PIR panel (4000 × 1200 mm). Kingspan's data sheet rates ducts made from it for -25 °C to +80 °C, up to 1000 Pa and 15 m/s.
- Pre-clad duct
- Pre-insulated ductwork with a tougher outer cladding for exposed or outdoor runs, such as Kingspan KDuct.
- Kingspan PalDuct
- Kingspan's pre-insulated duct panel range for the Middle East, made in Dubai. It includes PalDuct PIR and PalDuct Phenolic panels, fabricated into ductwork by approved fabricators.
- Galvanised steel ductwork
- Traditional ductwork made from galvanised sheet steel, installed first and insulated separately on site with a second fix.
- Kingspan KoolDuct
- Kingspan's premium pre-insulated ductwork system made from rigid phenolic panels with aluminium facings. Kingspan reports it was the first rigid phenolic pre-insulated duct to be UL 181 listed as a Class 1 Air Duct.
- Duct lagging
- Insulation wrapped around the outside of metal ductwork after installation, such as mineral wool or elastomeric foam.
- PIR duct
- A pre-insulated duct made from rigid polyisocyanurate (PIR) foam panels. A cost-effective pre-insulated option with low thermal conductivity.
- Duct board
- Rigid insulation boards (fibreglass or foam) that are cut and folded into ducts. Phenolic and PIR panels are the modern foam-based form.