HVAC ducts · Glossary

Kingspan PalDuct

Kingspan's pre-insulated duct panel range for the Middle East, made in Dubai. It includes PalDuct PIR and PalDuct Phenolic panels, fabricated into ductwork by approved fabricators.

Related terms in HVAC ducts

Kingspan KoolDuct
Kingspan's premium pre-insulated ductwork system made from rigid phenolic panels with aluminium facings. Kingspan reports it was the first rigid phenolic pre-insulated duct to be UL 181 listed as a Class 1 Air Duct.
PalDuct PIR 20P80
A 20 mm Kingspan PalDuct PIR panel (4000 × 1200 mm). Kingspan's data sheet rates ducts made from it for -25 °C to +80 °C, up to 1000 Pa and 15 m/s.
PIR duct
A pre-insulated duct made from rigid polyisocyanurate (PIR) foam panels. A cost-effective pre-insulated option with low thermal conductivity.
PalDuct PIR 30P200
A 30 mm Kingspan PalDuct PIR panel (4000 × 1200 mm) for higher pressures and air speeds than 20P80, including outdoor runs.
Phenolic duct
A pre-insulated duct made from rigid phenolic foam panels. Phenolic has very low thermal conductivity and strong fire performance, so the walls can be thin.
Pre-clad duct
Pre-insulated ductwork with a tougher outer cladding for exposed or outdoor runs, such as Kingspan KDuct.
Pre-insulated duct
HVAC ductwork fabricated from rigid insulation panels with aluminium facings on both sides, so the duct and its insulation are one lightweight piece installed in a single fix.
Galvanised steel ductwork
Traditional ductwork made from galvanised sheet steel, installed first and insulated separately on site with a second fix.

All hvac ducts terms → · Full glossary →