HVAC ducts · Glossary
Phenolic duct
A pre-insulated duct made from rigid phenolic foam panels. Phenolic has very low thermal conductivity and strong fire performance, so the walls can be thin.
Related terms in HVAC ducts
- Pre-insulated duct
- HVAC ductwork fabricated from rigid insulation panels with aluminium facings on both sides, so the duct and its insulation are one lightweight piece installed in a single fix.
- PIR duct
- A pre-insulated duct made from rigid polyisocyanurate (PIR) foam panels. A cost-effective pre-insulated option with low thermal conductivity.
- Kingspan KoolDuct
- Kingspan's premium pre-insulated ductwork system made from rigid phenolic panels with aluminium facings. Kingspan reports it was the first rigid phenolic pre-insulated duct to be UL 181 listed as a Class 1 Air Duct.
- Kingspan PalDuct
- Kingspan's pre-insulated duct panel range for the Middle East, made in Dubai. It includes PalDuct PIR and PalDuct Phenolic panels, fabricated into ductwork by approved fabricators.
- PalDuct PIR 20P80
- A 20 mm Kingspan PalDuct PIR panel (4000 × 1200 mm). Kingspan's data sheet rates ducts made from it for -25 °C to +80 °C, up to 1000 Pa and 15 m/s.
- PalDuct PIR 30P200
- A 30 mm Kingspan PalDuct PIR panel (4000 × 1200 mm) for higher pressures and air speeds than 20P80, including outdoor runs.
- Pre-clad duct
- Pre-insulated ductwork with a tougher outer cladding for exposed or outdoor runs, such as Kingspan KDuct.
- Galvanised steel ductwork
- Traditional ductwork made from galvanised sheet steel, installed first and insulated separately on site with a second fix.