Expansion joints & louvres · Glossary
Wheel load
The load one wheel puts on a joint cover. Joint load tables list air-filled tyres, solid plastic tyres and hard wheels separately, usually on a 200 × 200 mm contact patch.
Related terms in Expansion joints & louvres
- Joint fire barrier
- A blanket or foam barrier fitted in the joint gap where it crosses a fire compartment floor or wall, tested to UL 2079 for its rating and movement.
- Surface-fixed joint cover
- A cover screwed on top of the existing floor instead of being set in the screed, used in refurbishments where the floor cannot be broken out.
- Contraction joint
- A narrow joint cut or formed in a slab to control shrinkage cracking. All-metal covers protect its edges from forklift and hard-wheel traffic.
- Beginning point of water penetration
- In AMCA 500-L, the free-area velocity at which 0.01 oz of water per ft² of free area starts to come through a louvre in a 15-minute test. Select louvres well below it.
- Replaceable centre seal
- The elastic insert in the middle of a joint cover that takes the movement and keeps water out, and can be changed without breaking out the floor.
- AMCA 500-L
- The laboratory test standard for louvres from the Air Movement and Control Association: pressure drop, water penetration, wind-driven rain and, in recent editions, wind-driven sand.
- Connection sheet
- The flexible flanges on each side of a watertight joint that are bonded into the waterproofing: long sheets for bitumen, short sheets for coatings, fleece-laminated sheets for liquid membranes.
- Storm-resistant louvre
- A louvre with drainable, hooked blades tested against wind-driven rain, for fresh air intakes that must stay dry. Rain classes are given at stated core velocities.