Kingspan KoolDuct vs PalDuct: choosing pre-insulated ductwork in Saudi Arabia
KoolDuct, PalDuct Phenolic, PalDuct PIR: what each Kingspan duct system is, how they differ on insulation, fire rating and operating limits, and how to pick one for a Saudi project.

Short answer: all three are Kingspan pre-insulated duct systems built from rigid foam panels with aluminium on both faces. KoolDuct and PalDuct Phenolic use a phenolic core: the thinnest insulation for a given performance and the strongest fire credentials. PalDuct PIR uses a polyisocyanurate core and is the value choice for many comfort-cooling jobs. In Saudi Arabia, PalDuct panels are the ones you will usually see on site, because Kingspan makes them in the region.
What "pre-insulated duct" actually means
Traditional ductwork is made from galvanised sheet steel, hung, and then wrapped in insulation as a second job on site. Pre-insulated ductwork skips the second job. The duct walls are the insulation: rigid foam panels faced with aluminium foil on both sides, cut, folded and glued into rectangular sections, joined with flanges and sealed.
The result is a duct that is much lighter, goes up in one fix, and can sit tight against the ceiling slab because there is no lagging to wrap around it. Kingspan puts the weight saving at up to 70–75% against galvanised steel ductwork lagged with mineral fibre, and notes that leaving out the lagging can save up to 200 mm in one dimension.
The three Kingspan systems side by side
| KoolDuct | PalDuct Phenolic | PalDuct PIR | |
|---|---|---|---|
| Core | Rigid phenolic foam | Rigid phenolic foam | Rigid polyisocyanurate (PIR) foam |
| Where it is made | Kingspan Technical Insulation (Europe and other plants) | Kingspan Insulation, Dubai | Kingspan Insulation, Dubai |
| Panel facts we can quote | 22 and 30 mm panels, 2950 × 1200 mm | UL 181 listed panels | 20P80 (20 mm) and 30P200 (30 mm), 4000 × 1200 mm, λ 0.020 W/m·K |
| Fire headline | UL 181 Class 1 Air Duct; Euroclass B-s1,d0 / B-s2,d0 | UL 181 listed | BS 476 Part 6 Class 0, Part 7 Class 1; ASTM E84 Class A |
Values are from Kingspan's published data sheets and announcements listed under Sources. Always check the current data sheet for the panel you are buying.
KoolDuct
KoolDuct is Kingspan's global premium system: rigid phenolic panels with reinforced aluminium facings. Kingspan describes it as the first rigid phenolic pre-insulated ductwork to be UL 181 listed as a Class 1 Air Duct. Phenolic's very low thermal conductivity lets the panel stay thin, and the fibre-free core means no loose fibres can get into the airstream.
PalDuct Phenolic
PalDuct Phenolic is Kingspan's phenolic panel made in Dubai Investment Park for the Middle East market, with UL 181 listed panels. Kingspan's own Saudi references for PalDuct Phenolic UL 181 panels include hotels and resorts at the Red Sea and Qiddiya, which tells you it is accepted on the Kingdom's flagship projects.
PalDuct PIR
PalDuct PIR uses a PIR core with embossed, lacquered aluminium facings. Kingspan's Middle East data sheet lists two panels:
- 20P80: 20 mm, rated for ducts from -25 °C to +80 °C, up to 1000 Pa and 15 m/s.
- 30P200: 30 mm, for higher pressures (up to 1750 Pa) and air speeds, and for runs that need a thicker wall.
Both make duct sections up to 4 m long and carry BS 476 Class 0 / Class 1 and ASTM E84 Class A ratings.
How to choose for a Saudi project
1. Start with the specification's fire clause. If the consultant asks for UL 181 listed duct material, phenolic (KoolDuct or PalDuct Phenolic) is the straightforward answer. If the clause is written around BS 476 Class 0 or ASTM E84 Class A, PalDuct PIR may also comply; check the exact wording.
2. Check pressure and velocity. Comfort-cooling supply and return in offices, schools and homes usually sit well inside PalDuct PIR 20P80's limits. High-velocity mains, long risers and plant connections may need 30 mm panels.
3. Think about condensation. Coastal cities like Jeddah and Dammam have humid air with a high dew point. Ducts carrying cold supply air through unconditioned ceiling voids need enough insulation to keep the outer surface above that dew point, or water will form on the duct. Thicker or lower-lambda panels give more margin.
4. Outdoor and exposed runs need protection. Rooftop runs face UV, sand and heat. Use a system designed for it (a pre-clad duct such as Kingspan KDuct, or a protective cladding), not bare panels.
5. Who fabricates matters as much as the panel. A pre-insulated duct is only as good as its cutting, gluing, sealing and reinforcement. Ask who fabricates the ducts, whether they follow Kingspan's fabrication guidelines, and how they test air leakage.
Where Nord WPI fits
Nord WPI is a Kingspan partner. We fabricate PalDuct pre-insulated ductwork in-house in Dammam on our own CNC line, so grooves, folds and fittings match the drawings, and we supply and install it across the Kingdom. If you are comparing systems for a project, our duct selector sizes the ducts and suggests a panel. Or send us the duct layout and we will price it in PalDuct PIR and Phenolic side by side.
Sources
- Kingspan, PalDuct PIR System technical data sheet (Middle East), 2015 edition.
- Kingspan Insulation LLC, announcement of the PalDuct phenolic UL 181 panel line in Dubai (Zawya / Middle East Construction News).
- Kingspan Insulation Saudi Arabia, company profile brochure (PalDuct Phenolic UL 181 project references).
- NBS Source, Kingspan KoolDuct System product data (panel sizes, Euroclass, standard BS EN 13403).
- Kingspan knowledge articles, Benefits of pre-insulated ductwork and Weight comparisons of ductwork.
Size your pre-insulated ducts
Enter airflow and run lengths. We size the ducts, suggest PalDuct PIR or Phenolic, and fabricate them in Dammam.
Open the duct selectorRelated articles

Car park soffit insulation: how thick does it need to be?
A bare 200 mm concrete slab loses heat at a U-value of about 3.4 W/m²K. Here is how much soffit insulation it takes to reach common targets — and why the board you choose changes the answer.

UL 181, ASTM E84 and Class 0: duct fire ratings explained
The fire tests behind duct specifications in the Gulf, what each one actually measures, and what to ask for in a submittal.

Phenolic vs PIR ducts: what is the difference, and which should you specify?
Both are rigid foam pre-insulated ducts. They differ in chemistry, fire behaviour, thermal performance and price. A plain guide for consultants and contractors.