Insulation & roofing · Glossary

SBC 601 / 602

The Saudi Building Code energy conservation requirements for residential (602) and non-residential (601) buildings, which set maximum U-values for roofs, walls and floors.

Related terms in Insulation & roofing

Vapour control layer (VCL)
A membrane that limits water vapour moving into the insulation, where it could condense.
Thermal bridge
A spot where heat bypasses the insulation, such as a steel beam or slab edge, raising energy use and condensation risk.
Tapered insulation
Insulation boards cut to a fall so a flat roof drains to its outlets without a screed to falls.
Inverted roof
A flat roof where the insulation sits above the waterproofing, protecting the membrane from heat and UV.
Warm roof
A flat roof with the insulation above the deck and below the waterproofing, keeping the structure warm and the dew point outside it.
Kingspan Thermaroof TR27
A Kingspan PIR roof insulation board for flat roofs under waterproofing membranes.
Kingspan Kooltherm K10
A Kingspan phenolic insulation board for soffits, with a facing suited to exposed ceilings such as car parks.
Soffit insulation
Insulation fixed to the underside of a slab, for example over car parks or open undercrofts, to cut heat flow into the rooms above.

All insulation & roofing terms → · Full glossary →